Find a medallion to fit chandlier canopy 6 inch and smaller

Beams Boiserie Coffers Domes Grills Medallions Rings Rosettes Tin-Ceilings Ceiling Trim Vaults Wall-Decor

Carvings Corbels Ceiling-Walls Columns-Cap-Base Cylinders Domes Facades Fireplace-Mantels Garden Kitchen-Posts

Legs Mouldings Niches Pediments Pilasters Railings Shutters Tin-Ceilings Finishes Ronan-Paint

Policy Commercial Custom-Dept Freight YouTube Catalogs Design Theory Materials Install-Products

Imperial Productions ®

Medium Canopy Collection

Sorted by Size 6" to 6-7/8"

Medium Canopy Collection

made from ArchPolymerTM / GRG-NeoPlasterTM / 24 Hardwoods / ResinMold®

Residential & Commercial Class-A Fire-Rated

Photo shows canopy

What is a Canopy?

The chandelier canopy does not go through the hole of the medallion. It sits up to the face of the medallion. This collection is sorted by the center flat area of the medallion around the hole. Your chandelier's canopy can cover this center flat area or you can allow it to cover part of the decorative pattern, thus the canopy can be larger than what is listed

Canopy 5" to 5-7/8"

Fast Track

to Canopy Size

up to ->

6-1/4" to 6-3/8"

6-1/2" to 6-5/8"

Canopy to 6"

Item 1) Canopy up to 6" (15.2cm)	Buy Options	Materials





IPMED500 is a Colonial style medallion and has a diameter of 18" (45.72cm) and a projection of 1" (2.54cm). The hole is 4" (10cm). The flat center ring around hole is 6" (15.2cm) so it fits a chandelier canopy up to 6" (15.2cm) however larger canopies can be accommodated when it covers the inner ring. The canopy sits on the top of the medallion not through the hole. This Colonial medallion has a simple design allowing it to be used with any style of chandelier. It is available in ArchPolymerTM and GRGNeoPlasterTM. Print the PDF Brochure to request a custom quote for options such as splitting and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Made in Canada

Item 2) Canopy up to 6" (15.24cm)	Buy Options	Materials






IPMED124 is a Neo Classical style Medallion denoted by Acanthus leaves and baquettes. Suitable for any Traditional elegant design. This medallion has a diameter of 24" (60.96cm). The center flat is for a chandelier canopy is 6" (15.24cm) with a hole of 4" (10cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 3) Canopy up to 6" (15.2cm)	Buy Options	Materials






IPMED129 is a Federal Style medallion has a diameter of 25-1/2" (64.77cm) and a projection of 1" (2.54cm). The hole is the standard size of 3-1/4" (15.2cm). This Federal style is denoted by a ring of palm leaves with an inner bead. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 4) Canopy up to 6" (15.2cm)	Buy Options	Materials





IPMED135 is a Beyond Modern medallion which is perfect for wall or ceiling design. This unique sun pattern is a focal point for any modern room. It has a diameter of 26-1/2" (67.3cm) and a projection of 2-7/16" (2.5cm). It fits a canopy of 4-1/2" (11.43cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRGNeoPlasterTM (a new age real plaster).

Canopy up to 6"

Diameter 27-1/2"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Item 6) Canopy up to 6" (15cm)	Buy Options	Materials






IPMRD8019 medallion has a diameter of 28" and a projection of 1-1/8". It fits a chandelier canopy up to 6" (15cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is best suited for classical chandeliers or for an eclectic style with a modern fixture. MartinRichardsDesignTM created this model with neo-classical elements utilizing acanthus leaves, baguettes, and an egg and dart ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 7) Fits Canopy up to 6" (15.24cm)	Buy Options	Materials






IPNP1062 is a Neo Classical Style medallion depicting Acanthus Leaves. It has a diameter of 28" (71.12cm) and a projection of 2-3/4" (7cm). It fits a chandelier canopy up to 6" (15cm) which sits on the top of the medallion not through the hole of 3-3/4" (9.5cm). This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 8) Canopy up to 6" (15.24cm)	Buy Options	Materials





IPNP1036H is a Federal Style medallion with a diameter of 30" (76.2cm) and a projection of 2" (5cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 8) Canopy up to 6" (15.2cm)	Buy Options	Materials






IPMED200 is a Federal Style medallion has a diameter of 31" (78.74cm) and a projection of 1-1/8" (2.8cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a circle of running beads on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada

Item 9) Canopy up to 6"	Buy Options	Materials






IPMED202 is a Federal Style medallion has a diameter of 31" (78.74cm) and a projection of 1-1/8" (2.8cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by an a band of fans and palmettes on the outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders. Made in Canada Alternate Size IPMED201-24"

Canopy to 6"

Diameter 32-3/8"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted * Made in Canada

Canopy to 6"

Diameter 32-1/2"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

Item 11) Diameter 32-1/2" (82.5cm)	Buy Options	Materials





IPMED144 is a Beyond Modern sun shaped medallion which is perfect for wall or ceiling design. This unique sun is perfect for a Beyond Modern style. The diameter is 32-1/2" (82.55cm) and a projection of 3" (7.6cm). The center canopy is a diameter of 6" (15.2cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRGNeoPlasterTM (a new age real plaster).

Item 12) Diameter 35" (88.8cm)	Buy Options	Materials






IPMED172 is a Federal Style medallion has a diameter of 35" (88.8cm) and a projection of 1-1/2" (2.8cm). It fits a chandelier canopy up to 6" (15.2cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a radiating Palm Leaves with a smooth outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 13) Canopy up to 6" (15.24cm)	Buy Options	Materials





IPNP1063 is a Federal Style medallion has a diameter of 35" (88.8cm) and a projection of 3" (7.62cm). It fits a chandelier canopy up to 6" (15.2cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by a radiating Palm Leaves with a smooth outer ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Item 14) Fits Canopy up to 6" (15cm)	Buy Options	Materials






IPMRD8040 is a 2 part Neo Classical Style medallion depicting Acanthus Leaves and bagettes. It has a diameter of 36" (91.44cm) and a projection of 1-1/8" (2.8cm). It fits a chandelier canopy up to 6" (15cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 15) Diameter 36" (91.44cm)	Buy Options	Materials






IPNP1062C is a 2 part Neo Classical Style medallion depicting Acanthus Leaves. It has a diameter of 36" (91.44cm) and a projection of 2-3/4" (7cm). It fits a chandelier canopy up to 6" (15cm) which sits on the top of the medallion not through the hole. This exquisite medallion will enhance any sophisticated decor. It is suited for classical chandeliers and modern fixtures. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 15) Canopy up to 6" (15.24cm)	Buy Options	Materials






IPMED190 is an Art Nouveau style Medallion with a diameter of 36" (91.44cm) and a projection of 2-1/4" (5.7cm). This nature inspired medallion is perfect for sunrooms and kitchens. It is best suited for a modern fixture. This Art Nouveau style is denoted by flowers. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 16) Fits Canopy up to 6" (15.3cm)	Buy Options	Materials






IPMED505 is a Colonial style medallion and has a diameter of 42" (106.68cm) and a projection of 2-1/4" (5.7cm). The inner flat area is 6" (15.3cm) however larger canopies can be accommodated when it covers the inner ring. The canopy sits on the top of the medallion not through the hole. This Colonial medallion has a simple design allowing it to be used with any style of chandelier. It is available in ArchPolymerTM for interior & exterior use and GRGNeoPlasterTM for Interior use. Print the PDF Brochure to request a custom quote for options such as splitting and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Made in Canada

Canopy to 6"

Diameter 45-3/4"

Click Cards for Photos, Brochures, Movies & Buy Options

Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated

* All Prices, Exchange and Specifications Subject to Change without Notice

* All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted

* Made in Canada

Canopy to 6"

Diameter 54"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted * Made in Canada

Item 20) Canopy up to 6" (15.24cm)	Buy Options	Materials






IPMED510 is a Federal Style medallion is 58" x 45" (147 x 115.6cm) and a projection of 1" (2.545cm). It fits a chandelier canopy up to 6" (15.24cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by radiating Fans and a Fluted Ring. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion.

Canopy 6-1/4" to 6-3/8"

Item 21) Canopy up to 6-1/4" (12.7cm)	Buy Options	Materials





IPNP1024H is a Art Deco style medallion denoted by the concentric rings. Great for hallways, powder rooms, fitting or small chandeliers or pot lights with a canopy up to 6-1/4" (12.7cm). Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 14-3/4" (37.46cm). The hole is 3" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 22) Canopy up to 6-1/4" (15.8cm)	Buy Options	Materials





IPMRD8050J is a rectangle Beyond Modern style panel/medallion denoted by recessed center frame. This medallion is 54-7/16" x 24-1/2". The center recessed area is 48" x 18-1/4". It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 23) Canopy up to 6-1/4" (15.9cm)	Buy Options	Materials






IPNP1055 is an Art Nouveau Nature inspired Medallion denoted by radiating fan paddles and an egg/dart ring. Art Nouveau style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 23-3/4" (60.32cm). It fits a canopy of 6-1/4" (15.9cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 24) Canopy up to 6-1/4" (15.9cm	Buy Options	Materials





IPMED509 is a Federal style medallion denoted by a running arrow. It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 21" (53.34cm) with a projection of 1-1/4" (3.18cm). The hole is 4" (10cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 25) Canopy up to 6-1/4" (15.9cm)	Buy Options	Materials





IPNP1035H is an Art Deco style medallion denoted by a concentric rings. Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 29" (73.66cm). We can create variations in carved hardwood. The center flat to the hole ring is 6-1/4" (15.9cm). It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 26) Canopy up to 6-1/4" (15.9cm)	Buy Options	Materials





IPNP1035 is an Art Deco style medallion denoted by a concentric rings. Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles as decoration to walls and ceilings. This medallion is 29" (73.66cm). We can create variations in carved hardwood. It is available in ArchPolymerTM (a synthetic plaster). For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Canopy to 6-1/4"

40-1/2" x 40-1/2"

Click Cards for Photos, Brochures, Movies & Buy Options



* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted, Made in Canada
Options:Materials Factory Painted Metal Coated FireRated

Canopy to 6-1/2" (16.5cm)

Item 28) Canopy up to 6-1/2" (16.5cm)	Buy Options	Materials






IPNP1058 is a Federal style medallion denoted by an outer ring of beads. It is perfect for powder rooms or halls and pot lights . This medallion has a diameter of 12-3/4" (32.38cm) with a projection of 1" (2.54cm). The center flat area for chandelier canopy or pot light cover plate is 6-1/2" (16.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 29) Canopy up to 6-1/2" (16.5cm)	Buy Options	Materials





IPNP1025H is a Art Deco style medallion denoted by the concentric rings. Great for hallways, powder rooms, fitting or small chandeliers or pot lights with a canopy up to 6-1/2" (16.4cm). Art Deco style medallions are perfect for any decor from traditional to Beyond Modern decorating styles. This medallion is 18" (45.72cm). The hole is 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Item 30) Canopy up to 6-1/2" (16.5cm)	Buy Options	Materials






IPMED132 is a Federal style medallion denoted by a ring of "bullets". It is perfect as a ceiling medallion for many styles of chandeliers. This medallion has a diameter of 21-1/2" (54.6cm) with a projection of 1-3/4" (4.45cm). The hole is 3-3/4" (9.5cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Vaulted ceilings specify Flexible ResinMold®. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster).

Canopy to 6-1/2"

Diameter 26"

Click Cards for Photos, Brochures, Movies & Buy Options



Options: Hole Size-Split Materials Factory Painted Metal Coated FireRated
* All Prices, Exchange and Specifications Subject to Change without Notice * All designs & content copyrighted 2025 ImperialProductions® or Permissions Granted * Made in Canada

Item 33) Canopy up to 6-1/2" (16.5cm)	Buy Options	Materials






IPMRD8001 is a Neo Classical style medallion by MartinRichardsDesignTM denoted by 4 Acanthus leaves and Banquettes. Great for Great Rooms, Large Bedrooms or Dining Rooms fitting chandeliers with a canopy up to 6-1/2" (16.5cm). Neo-Classical style medallions are perfect for any elegant decor. This medallion is 42" (106.68cm). It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Item 36) Canopy up to 6-1/2" (16.5cm)	Buy Options	Materials






IPMRD8042 is a Neo Classical style medallion denoted by Acanthus leaves and a ring of Egg and Dart pattern. Great for Great Rooms, Large Bedrooms or Dining Rooms fitting chandeliers with a diameter of 54" (137.16cm). It is made from 2 parts Ring and Medallion. It has a 4" (10cm) hole and fits a canopy up to 6-1/2" (16.5cm). Neo-Classical style medallions are perfect for any elegant decor. It is available in ArchPolymerTM (a synthetic plaster) for interior and exterior use. For Commercial and Public Buildings specify Fire Rated ArchPolymerTM or GRG-NeoPlasterTM (real plaster). Made in Canada

Canopy to 6-5/8" to 6-7/8"

Item 34) Diameter 36" (91.44cm)	Buy Options	Materials






IPMED171 is an Art Nouveau style Medallion with a diameter of 36" (91.44cm) and a projection of 2-1/4" (5.7cm). This nature inspired medallion is perfect for sunrooms and kitchens. It is best suited for a modern fixture. This Art Nouveau style is denoted by radiating Acanthus Leaves. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Print the Brochure to request a custom quote for options and volume orders.

Item 35) Canopy up to 6-7/8" (17.5cm)	Buy Options	Materials






IPMED145 is a Colonial style medallion and has a diameter of 32-1/2" (82.55cm) and a projection of 2-1/8" (5.4cm). The inner flat area is 6-7/8" (17.5cm) however larger canopies can be accommodated when it covers the inner ring. The canopy sits on the top of the medallion not through the hole. This Colonial medallion has a simple design allowing it to be used with any style of chandelier. It is available in ArchPolymerTM for interior & exterior use and GRGNeoPlasterTM for Interior use. Print the PDF Brochure to request a custom quote for options such as splitting and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Made in Canada

Item 36) Canopy up to 6-7/8" (15.2cm)	Buy Options	Materials





IPMED164 is a Federal Style medallion has a diameter of 44-1/2" (113cm) and a projection of 1-5/8" (4.13cm). It fits a chandelier canopy up to 6-7/8" (15.2cm) which sits on the top of the medallion not through the hole. It is suited for classical chandeliers and modern fixtures. This Federal style is denoted by rings of swirls and ribbon & reed. It is available in ArchPolymerTM and custom made in GRGNeoPlasterTM, GFRC-ZeamentTM. Print the PDF Brochure to request a custom quote for options and volume orders Link to many of our custom options To Install buy the approved Adhesive and PolySpackling compound to fill any gaps between the ceiling and the medallion. Similar medallion: IPMED148-32-1/2"